Kamstrup MULTICAL 62 Technical Description Download Page 94

Page: 94 / 100

TECHNICAL DESCRIPTION

MULTICAL® 62

Ka st up A/“ •

Technical

Des iptio •

5512-1036-GB_D1

•

.2016

Approvals

15.1

Type approvals

MULTICAL®

62 has been MID approved on the basis of OIML R49-1:2006 and R 49-2:2006, with FORCE Certification as

notified body.
Please contact Kamstrup A/S for further details on type approvals and verification.

15.2

CE-Marking

MULTICAL®

62 is CE-marked in accordance with the following directives:

EMC directive

2004/108/EC

LV directive

2006/95/EC (together with Pulse Transmitter)

PE directive

/ /EF DN …DN

atego

15.3

Measuring Instrument Directive (MID)

MULTICAL®

62 is available with CE-marking according to MID (2004/32/EU). The certificates have the following

numbers:

B-module:

DK-0200-MI001-016

D-module:

DK-0200-MIQA-001

Summary of Contents for MULTICAL 62





































































































Search results

Summary of Contents for MULTICAL 62

Reviews:

Related manuals for MULTICAL 62

Brands by name

Popular brands

Kamstrup MULTICAL 62, Technical Description

Search results

Summary of Contents for MULTICAL 62

Reviews:

Related manuals for MULTICAL 62

Brands by name

Popular brands