39
Kampmann Assembly and Installation Instructions - UniLine Cassette Door Air Curtains
Electrical wiring |
UniLine EC, KaControl model (*C1)
Step 4:
Set the
switching-off time
you require by turning the navigator dial. Once
the minutes have been set, press the navigator dial to apply
the
switching-off time
and to call up the timer program start screen.
(Step 1).
IMPORTANT NOTE:
Call up the respective weekday and associated timer program no. to
delete switching-on and switching-off times entered (Step 1 + Step 2).
Replace the switch-on or off time entered by “ – –: – –“
(Step 3 + Step 4).
You can overwrite timer entries at any time either as a block or for each
day.
Only request switch-on and off times singly for each day. It is not
possible to request switching-on and off times as a block where there are
differing time entries for the respective days of the week and the time is
then shown by "--:--".
To exit the "Timer programs" selection menu, press and hold down the
navigator dial for 3 seconds in the timer program start screen or do not
use the KaController for 15 seconds.
Input screen for
switching-off time
Summary of Contents for UniLine 10
Page 65: ......
