Kalmar DRD450-80S4X Maintenance Manual Download

Page: 138 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

6 Suspension – 6.3 Tyre and rim system

page

–

Tyre and rim system, removing (drive axle)

Read the safety instructions before working with the tyre and rim,
see

Tyre and rim system, safety page 7

1 Lift the machine under the drive axle by the wheel in question.

Support under the drive axle in a safe and adequate manner.

2 Deflate

the

tyre.

If tyre and rim are in good condition, release air through the
valve.

If the tyre or rim is damaged, deflate the tyre by drilling a hole
in the tread.

3 Loosen the wheel nuts.

4 Secure the wheel with lifting equipment.

5 Remove nuts, washers and clamps.

000384

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRD450-80S4X

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRD450-80S4X

Reviews:

Related manuals for DRD450-80S4X

Brands by name

Popular brands

Kalmar DRD450-80S4X, Maintenance Manual

Search results

Summary of Contents for DRD450-80S4X

Reviews:

Related manuals for DRD450-80S4X

Brands by name

Popular brands