Kalmar DRD450-80S4X Maintenance Manual Download

Page: 68 / 600

UDRF01.04GB

Maintenance manual DRF 400–450

1 Engine – 1.2.3 Fuel pre-filter

page

–

Metal filter supply line, cleaning (engine
alternative Volvo)

1. Attachment point, inlet
2. Metal filter's position in the hose
3. Attachment point, supply line

1 Use hose pliers and stop the fuel flow to the fuel filter.

2 Disconnect the hose in its attachments at position 1 and posi-

tion 3.

3 Blow clean the hose with compressed air.

1.2.3

Fuel pre-filter

page

–

Fuel pre-filter, changing (Volvo engine)

NOTE

Avoid skin contact with fuel, use gloves. Fuel on hands may
cause rashes and irritation.

D A N GE R

Pay attention to the fire hazard when working on
the fuel system.

Avoid changing the fuel pre-filter when the engine
is hot.

Fuel may spill on hot surfaces and may ignite.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRD450-80S4X

























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DRD450-80S4X

Reviews:

Related manuals for DRD450-80S4X

Brands by name

Popular brands

Kalmar DRD450-80S4X, Maintenance Manual

Search results

Summary of Contents for DRD450-80S4X

Reviews:

Related manuals for DRD450-80S4X

Brands by name

Popular brands