background image

UDRF01.04GB

Maintenance manual DRF 400–450

4 Brakes – 4.3.4 Accumulator

9

4.3.4

Accumulator

page

 

Accumulator, checking

 

1  Start the engine and let it idle for approx. 1 minute (until the ac-

cumulator charging valve switches to cooling).

2  Turn off the engine and turn the start key to position I.

3  Apply and release the brake several times, and count the 

number of times that the brake can be applied before the warn-
ing light for low brake pressure is activated.

It should be possible to apply the brake 8 times before the 
warning light for low brake pressure is activated.

If the warning light for low brake pressure is activated, one of 
the brake system's accumulators is probably defective and 
these should therefore be checked further.

https://www.forkliftpdfmanuals.com/

Summary of Contents for DRD450-80S4X

























































































































































































































































































































































































































































































































































































































Reviews: