Kalmar DRD450-80S4X, Maintenance Manual

Page: 359 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
D Error codes – 2 Transmission 41
41.06 41.06 Incorrect gear
selection from
gear selector. Control unit
doesn't allow
change of range,
however, opera-
tion of machine is
possible. Check cabling to
gear selector with
regards to signal
range. - - 2.1.1 Gear and
multi-func-
tion lever
42.04 42.04 Actual gear ra-
tio too low. Control unit indi-
cates that one or
several clutches
are slipping. Check transmis-
sion with purpose
to understand if
and, if that is the
case, which clutch
is slipping.
Check the set
transmission ratio
for the control unit.
- - 2.3 Mechani-
cal transmis-
sion
42.05 42.05 Actual gear ra-
tio too high. Control unit indi-
cates that one or
several clutches
are slipping. Check transmis-
sion with purpose
to understand if
and, if that is the
case, which clutch
is slipping.
Check the set
transmission ratio
for the control unit.
- - 2.3 Mechani-
cal transmis-
sion
43.03 43.03 Signal from
Sensor engine
rpm and oil
temperature
transmission
outside valid
range. Control unit indi-
cates the error. Check cabling to
sensor tempera-
ture torque con-
verter.
Check sensor tem-
perature torque
converter.
D793/H3
- B758/
766 TRANSM
, menu
10 2.2.5 Sensor
engine rpm
and oil tem-
perature
transmission
43.07 43.07 Torque convert-
er temperature
exceeds 100
°
C.
Control unit indi-
cates the error to
make operator
aware of the
warning's level. Check cabling to
sensor tempera-
ture torque con-
verter.
Check sensor tem-
perature torque
converter.
D793/H3
- B758/
766 TRANSM
, menu
10 2.2.5 Sensor
engine rpm
and oil tem-
perature
transmission
Description Limitation Action
Con-
nec-
tion
and
compo-
nent
Diag-
nostic
menu
Function
group
Code Dan
a
code
https://www.forkliftpdfmanuals.com/