Kalmar DRD450-80S4X, Maintenance Manual

Page: 91 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
2 Transmission – 2.6 Lubrication 7
2.6 Lubrication
page –
Lubrication system, description
The transmission has its own lubrication system that is used for lu-
brication, control and cooling of the transmission. The transmission
oil cooler is located at the bottom in the cooler unit behind the en-
gine, a thermostat in the cooler enables the oil to reach operating
temperature faster.
At high oil temperature (120
°
C) a warning is activated in Control unit
KID (D795) and performance is reduced, if the oil temperature goes
above 125
°
C the transmission is disengaged.
For position of components see Transmission, component position
page 4 .
page –
Oil and oil filter, changing
NOTE
The transmission must not be overfilled!
1 Operate and warm up the transmission oil.
2 Machine in service position, see section B Safety .
Draining transmission oil
3 Place a receptacle under the transmission.
4 Remove the drain plug for transmission oil and let the oil drain
into the receptacle.
W A R N I N G
Avoid skin contact with the oil, use protective
gloves.
Hot oil may cause burns, rashes and irritation!
https://www.forkliftpdfmanuals.com/