Kalmar DRD450-80S4X, Maintenance Manual

Page: 37 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
C Preventive maintenance – Preventive maintenance 5
page –
50h-check
For new machine, checks shall be performed after 50h operating
time. Checks are performed to increase the machine’s reliability.
1 Engine Reference
Leakage check oil, coolant, exhaust system
Coolant level, check Section 1 Engine, group 1.7.7 Coolant
Oil and oil filter, change Section 1 Engine, group 1.8 Lubrication
Air filter main cartridge, inspection Section 1 Engine, group 1.6.1 Air cleaning system
Air filter safety cartridge, inspection Section 1 Engine, group 1.6.1 Air cleaning system
Drive belt tension, check Section 1 Engine, group 1.7.5 Cooling fan
Bolted joints, attachments, mountings, hose clamps,
wear and chafing of hoses, cable harnesses, etc.
Fuel pre-filter, drain water Section 1 Engine, group 1.2.3 Fuel pre-filter
2 Transmission
Leakage check
Oil level, check Section 2 Transmission, group 2.6 Lubrication
Transmission oil filter, changing Section 2 Transmission, group 2.6 Lubrication
3 Driveline/axle
Mounting propeller shaft, check-tightening Section 3 Driveline/axle, group 3.2 Propeller shaft
Mounting drive axle, inspection Section 3 Driveline/axle, group 3.3 Drive axle
4 Brakes
Power-assisted brake, function check Section 4 Brakes, group 4.3.4 Accumulator
Parking brake, function check
Leakage check
5 Steering
No action
6 Suspension
Tyre system, check Section 6 Suspension, group 6.3 Tyre and rim system
Wheel nuts, check-tightening Section 6 Suspension, group 6.3 Tyre and rim system
7 Load handling
Hose connections, check-tightening
Chain tension extension (spreader), check and adjust Section 7 Load handling, group 7.5.7 Positioning chains
8 Control system
Check that there are no active error codes Section 8 Control system, group 8.3 Error codes
https://www.forkliftpdfmanuals.com/