Kalmar DRD450-80S4X, Maintenance Manual

Page: 380 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
62 D Error codes – 8 Control system
98 Signal error from
Sensor temperature
outlet fan (B775-2). Air condi-
tioning not
working. Check cabling between the
control unit and component
with diagnostic menu.
Check component.
D790-1/
K4:10 –
B775-2 CLI-
MATE,
menu 2 9.4.16 Sensor
temperature
outlet fan
99 Signal error from
Sensor temperature
refrigerant (B775-3). Air condi-
tioning not
working. Check cabling between the
control unit and component
with diagnostic menu.
Check component.
D790-1/
K4:11 –
B775-3 CLI-
MATE,
menu 2 9.4.12 Sensor
temperature
refrigerant
101 Redundant voltage
feed left to control
unit frame front
(D797-F) does not
arrive. – Check cabling between the
control unit and component
with diagnostic menu.
Check component.
D797-F/
K2:7 CAN/
POWER,
menu 8 11.5.1.2 Re-
dundant volt-
age feed of
control units
102 Redundant voltage
feed right to control
unit frame front
(D797-F) does not
arrive. – Check cabling between the
control unit and component
with diagnostic menu.
Check component.
D797-F/
K2:8 CAN/
POWER,
menu 8 11.5.1.2 Re-
dundant volt-
age feed of
control units
103 Voltage feed to
Control unit frame
front (D797-F) be-
low 18 V or above
32 V. – Check fuse F58-2:1, change
if needed.
Check cabling between the
control unit and component
with diagnostic menu.
D797-F/
K2:1/9/10 CAN/
POWER,
menu 8 11.5.1.3 Igni-
tion voltage
(15)
104 Incorrect control
breaker voltage to
Control unit frame
front (D797-F) Control
breaker can-
not be re-
leased. All
hydraulic
functions
blocked. Check fuse F58-3:2, change
if needed.
Check cabling between the
control unit and component
with diagnostic menu.
Check component.
D797-F/
K2:11 CAN/
POWER,
menu 8 11.5.1.4 Con-
trol switch
voltage (15E)
105 5 V supply voltage
to sensor below 4.9
V or above 5.1 V. – Check cabling between the
control unit and component
with diagnostic menu.
Check component.
D797-F/
K1:8 CAN/
POWER,
menu 9 11.5.3.2 Con-
trol unit frame
front
106 Incorrect values for
load curve. Lift and low-
er as well as
extension
not working. Contact Kalmar Industries
AB – – 7.2 Lift and
lower 7.3 Ex-
tension
Code Description Limitation Action Connec-
tion and
compo-
nent Diag-
nostic
menu Function
group
https://www.forkliftpdfmanuals.com/