Kalmar DCE80-100E, Technical Handbook

Page: 315 / 317

DCE80-100E
Technical Handbook
Periodic supervision
13 P. Group 90
TDCE01
04GB
Every 1000 hours
Item Unit Action Remarks
1 Cabin filter element Change filter element See Group 10
2 Engine Check valve clearances, cooling
system, starter motor, alternator
and fuses See engine maufacurer’s
Workshop Manual and Group 30
3 Fuel tank Drain
4 Fuel filter Change the filter.
Bleed the fuel system.
5 Injectors Check See engine maufacurer’s
Workshop Manual
6 V-belts Check and change as neces-
sary.
7 Batteries Check
8 Wheels Check for damage
9 Propeller shaft Check the bolted joints and
check the universal joints for play See Group 40
10 Transmission and drive axle Clean the breather filter
11 Lifting chains Check See Group 80
12 Painting and safety marking Touch up
13 All functions Test-drive and check
14 (Air conditioner) Check the refrigerant level
15 Check accumulator pre-charging
pressure See Group 70
16 Lubrication points, oil and filter
changes in accordance with the
Lubrication chart.
17 500 hours service
IMPORTANT!
Always attend to any damage, wear or faults that are im-
portant to the performance of the truck
and its service life or the safety of the personnel.