Kalmar DCE80-100E, Technical Handbook

Page: 311 / 317

DCE80-100E
Technical Handbook
Periodic supervision
Lubrication, C-hook Side-lift
9 P. Group 90
TDCE01
04GB
L=Lubricate
C=check
Pos
nr Benämning Intervall Antal
smörj-
pkt
Anm
500 1000
1 Cylinders, side locking plates L 4 Check that the sensors are free from grease
and that the sensor faces are undamaged
Check the function, see group 80
2 Cylinder, sideshift L 2
3 Cylinders, length adjustment L 4
4 Hooks L 2 Disassemble and check the hooks every 5000
h. See Technical Handbook group 80.
Same procedure should be used at suspected
damage.
5 Spring loaded contact pin, align-
ment against upper container C 2 Check that the sensors are free from grease
and that the sensor faces are undamaged
Check the function, see group 80
6 Spring loaded contact pin, align-
ment against lower container C Check that the sensors are free from grease
and that the sensor faces are undamaged
Check the function, see group 80
7 Cylinders, levelling L 4
8 Support wheels L K 4
9 Sliding surfaces, length adjustment L Brush onto all sliding surfaces with the sidelift
in the fully extended position