Kaiser KA 2 Series, User Manual, Page: 80 / 92

80
Note!
TIMER Operation
To set the starting time
To set the stopping time.
Due to the difference of the set
temperature of the unit and the actual
indoor temperature, the Air Conditioner
when in DRY mode will automatically
operate many times without running the
COOL and FAN mode.
• Push TIMER ON button to set the
auto- on time and TIMER OFF
button to set the auto-off time.
• Push the TIMER ON button, then
the remote controller shows TIMER
ON , the last set time for the starting
operation and the signal
will be
shown on the DIGITAL DISPLAY
area. You are now ready to reset the
time to START the operation.
• Push the TIMER ON button again to
set desired unit start time.
• After setting the TIMER ON ,there
will be a one-half second delay
before the remote
controller
transmits the signal to the air
c o n d i t i o n e r . T h e n , a f t e r
approximately another 2 seconds,
the signal
disappears and the set
temperature will re-appear on the
digital display.
• Push the TIMER OFF button and
the remote controller will show
TIMER OFF, the last set time for the
stopping operation and the signal
will be shown on the DIGITAL
DISPLAY area. You are now ready
to reset the time of the STOP
operation.
• Push the TIMER OFF button again
to set the time you want to stop the
operation.
• After setting the TIMER OFF ,there
will be a one-half second delay
before the remote controller
transmits
the signal to the air
c o n d i t i o n e r . T h e n , a f t e r
approximately another 2 seconds,
the signal
disappears and the set
temperature will re-appear on the
digital display.
h
h
h
h
EN
77