Adjusting the setting
Adjust the switching point by moving the sensing contact slightly along an arrow.
You may fine-adjust the switching point to the length of the arrow.
■ Moving towards the arrow head lowers the oil level point at which the sensor triggers.
■ Moving away from the arrow head raises the oil level point at which the sensor triggers.
Fig. 17 Option C5: Changing the oil level monitoring setting
1
Switch cover
2
Screw
3
Red arrow
4
Sensing contact
5
Adjustment range
6
Higher oil level
7
Lower oil level
1. Switch off the machine.
2. DANGER!
Electric voltage!
Risk of fatal injury caused by contact with live components!
➤ Switch off and lock out the power supply disconnecting device and verify the absence of
any voltage.
3. Open the switch cover.
4. Unfasten the screw and move the sensing contact.
5. Re-tighten the screw.
6. Close the cover until it latches.
7. Switch on the machine.
6
Installation
6.9
Options
No.: 9_5752 24 E
Assembly and operating manual 1-stage piston compressor
EPC-G
43
