JVC VN-H657BU, Instruction Manual

Page: 97 / 120

Pan / Tilt / Zoom
0
Pan / Tilt operation:
Press the arrow buttons to move the display area
in the direction indicated by the arrow. Release
the button to stop the movement.
Press the [H] button to move to the home
position.
0
Zoom operation:
Use this function to perform zoom operation on
the display area.
[+]: Zooms in and enlarges an object.
[-]: Zooms out and reduces an object.
0
Scale display:
Displays the current magnification.
Memo :
0
You can restrict the magnification of an object
using the [+] button by altering the [EZoom
Limit] settings.
(
A
p.67 [ EZoom Limit ] )
0
You can manipulate zooming by rotating the
mouse wheel.
0
You can operate the Pan, Tilt and Zoom
functions using a mouse. If you click the mouse
on the screen, the clicked spot will be the center
of the display area. (Click on Center)
0
If “Click on Center” is not functioning properly,
set the magnification to “100%” by clicking the
magnifying glass icon at the bottom right of the
window in the case of Internet Explorer 8, or the
settings icon at the top right corner in the case
of Internet Explorer 9 and Internet Explorer 10.
If doing so does not resolve the problem, set
[Protocol] of Built-in Viewer to “HTTP(Unicast)”,
and [Encoder] to “No.1”.
(
A
p.91 [Built-in Viewer Screen Configuration] )
Speed
Sets an operation speed.
9 Pan / Tilt
Controls the speed of [Pan / Tilt] operation. A larger
value increases the operation speed.
[Set values: 1 to 8]
9
Zoom
Controls the speed of [Zoom] operation. A larger
value increases the operation speed.
[Set values: 1 to 4]
[PTZ Control]
Operates the pan/tilt/zoom (PTZ) function. Operate
the camera to adjust the direction, angle and focus.
This page can be used during access using
“admin” or “operator”.
0 While another menu is open, click [Control],
followed by clicking [PTZ Control] in the
operation menu to open the control screen.
.
Auto Function
Select an Auto action, and press the [Start] or
[Stop] button.
0
[Start] button:
Start the selected Auto function.
0
[Stop] button:
Stop the running Auto function.
Selectable Auto functions
0
Auto Pan:
Performs the configured auto pan operation.
(
A
p.95 [ Auto Pan ] )
0
Auto Patrol 0 to 2:
Perform the preset Auto Patrol operation
corresponding to the selected number. Repeats
from the beginning after the series of operations
are complete.
(
A
p.69 [[Auto Patrol] Page] )
[Control] - [PTZ Settings]
97
Operation