[Auto Patrol] Page
This function sets the Auto Patrol operation which
patrols multiple positions at specified time
intervals. You can set the order in which to view the
determined positions.
This page can be used during access using
“admin” or “operator”.
.
0
Open the side menu by clicking [Advanced
Settings] in the menu, followed by clicking [Auto
Patrol 0], [Auto Patrol 1], or [Auto Patrol 2].
0
Press the [OK] button to enable the new
settings.
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made.
Settings
There are three screens in Auto Patrol.
(The screen below appears when [Auto Patrol 0] is
clicked.)
.
* Setting values with
R
are default values.
No.
Switches the camera image from No. 0 to 99 in
sequence.
Title
This displays the title of the position.
Position
This sets the position number to be moved in
sequence.
[Set values: 0 to 99]
Memo :
0
Specify the setting for Preset Position in [PTZ
Settings] of Built-in Viewer.
Stay Time
This sets the duration of displaying the images at
each position.
For positions that you do not want to display during
Auto Patrol, set to “Skip”.
[ Set values: Skip,
R
10, 20, 30, 45, 60, 120]sec
Moving Speed
This item sets the speed of moving to the preset
position.
[Set values: Low, Mid,
R
High]
[Advanced Settings] Page -[Auto Patrol] Page
69
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
