7
Connect the audio cable.
0
Get ready a separate cable for connecting to
the audio device.
0
Connect the cable of the audio equipment
with the audio cable of the camera by
soldering or crimping.
0
Audio cable (white/white) (mic input):
Connect with the cable from devices such as
a capacitor microphone that supports plug-in
power.
0
Audio cable (light green/light green) (line
output):
Connect with the cable from devices such as
speakers with a built-in amplifier.
0
For information on the color and signal name
of the audio cable, refer to the following.
0
Connect the audio cable, followed by
winding the waterproof tape (adhesive).
0
After connecting, push the audio cable into
the arm of the camera.
.
Wind the
waterproof tape
(adhesive)
Insulating
tape
Solder welding or
crimping
Cable for connecting to the audio device
(microphone input/line output)
0
Shielded cable recommended
0
Length of 5 m or shorter recommended
Note :
0
For cables that are not used, be sure to wrap the
ends individually with waterproof tape
(adhesive) to ensure that waterproof treatment
is performed.
0
For safety reasons, turn on the power only after
ensuring that all the connections are in place.
8
Attach the cap, and seal the cable
connection hole and areas around the
camera’s mounting surface and the
four anchor bolt fasteners with a
waterproof sealant (GE silicon).
.
Waterproof
treatment
Waterproof
treatment
(x4)
Cap
Note :
0
Ensure that waterproof treatment is performed.
Otherwise, the camera may malfunction due to
rain water seepage.
0
Use GE silicon or other similar product for the
sealing material.
9
Remove the dome cover protective
sheet.
.
Protective
sheet
Installation of the camera is complete. Next, set
the IP address of the camera.
p.38 [IP Address Setting Procedure] )
Removing the Camera
1
Remove the waterproof sealants (GE
silicon) for sealing the cable
connection hole, areas around the
camera’s mounting surface, and the
four anchor bolt fasteners .
2
Remove the cable connection cap, and
take out the cables.
3
Remove the cables, and dismantle the
camera from the wall.
Mounting the Camera (VN-H657WPBU)
37
Moun
tin
g
the
Ca
m
era
