0
Our company shall not be liable for any
accidental damage caused to the data stored in
the card. Please back up important data on
devices such as a computer.
p.86 [[Export(Y/M/D-h:m:s)] Menu] )
0
To erase data stored in the SD card completely,
it is recommended that you make use of a
commercially-available data erasure software
program, or destroy the SD card physically such
as by using a hammer.
0
Use the card within the operational
requirements. Do not use it at the following
locations.
0
Places exposed to direct sunlight.
0
Places near thermal equipment.
0
In a car under the sun with the windows
closed.
0
Places subject to high humidity, corrosion,
etc.
0
Do not bend or drop the card, or subject it to
strong impact or vibrations.
0
Do not wet the card.
0
Do not touch the connection terminals.
0
Prevent dust, dirt, moisture or other foreign
substances from being attached to the
connection terminals.
0
Do not peel off the label attached to the SD card,
or attach another label of sticker over it. This may
cause the equipment to malfunction.
0
To write characters on a SD card, do not use a
pencil or ballpoint pen. Make sure that a felt-tip
pen is used.
0
It may be difficult to remove some SD cards from
the slot of the camera.
0
When removing the SD card from the card slot,
it may sometimes pop out forcefully. Be careful
not to lose it.
Disclaimer
0
The motion detection, tampering detection, and
audio detection features are not intended to
prevent theft or fire. Our company shall not be
liable for any inconveniences or failures that
occur.
0
We shall not be responsible for any losses
incurred in the event of privacy invasion caused
by the videos captured by the camera or audio
of this product.
Saving Energy
0
If the camera is not to be used for a long time,
turn off the power of the system for safety and
energy conservation reasons.
Auto Focus
0
Auto Focus operation can be performed on this
product after the pan/tilt/zoom (PTZ) operation
stops.
For more details, refer to “Easy AF” on the [PTZ
Control] page.
0
Easy AF may not be able to achieve focus
depending on the camera setting, subject, and
light condition. In this case, set the focus
manually.
0
Objects which are difficult to be focused
automatically.
0
When the brightness of the image plane is
extremely high (bright).
0
When the brightness of the image plane is
extremely low (dim).
0
When the brightness of the image plane is
constantly changing (for example, a blinking
light).
0
When there is almost no contrast.
0
When there are repetitive vertical striped
patterns on the image plane.
0
Auto Focus is difficult to set under the following
conditions.
0
When sensitivity is increased with AGC and
the screen is grainy.
0
When there is less movement on the screen
due to the Sense Up function.
0
When there is no clear contour in electronic
zoom.
Zoom Operation
0
The following phenomena are the results of the
built-in lens performance and are not
malfunctions.
0
When manual operation or preset is selected,
focus moves slightly after the zoom operation
has stopped near the TELE end.
0
The zoom operation is not smooth during
manual operation.
0
When Preset is selected, the camera
becomes out of focus for an instant during
zooming.
Precautions
7
Gettin
g Started
