9
Pre-Trigger
For setting the FTP pre-recording trigger time
(recording time before alarm input) in seconds.
[Set values: 0 to
R
5 to 60]sec
9
Post-Trigger
For setting the FTP post-recording trigger time
(recording time after alarm input) in seconds.
[Set values: 0 to
R
5 to 60]sec
Memo :
0
[Pre-Trigger] and [Post-Trigger] cannot be set to
“0 sec” at the same time.
0
To keep only one image at the time of alarm
occurrence, set [Pre-Trigger] or [Post-Trigger]
to “1 sec”, and [Encoder] of [Alarm] to “1 fps”.
9
Sunday to Saturday
For selecting whether to activate or stop recording
by day of the week.
[Set values:
R
Unmask All, Mask All, Unmask
Span, Mask Span]
0
For setting the time period when “Unmask
Span” or “Mask Span” is selected.
[Set values: 00H00M to 24H00M]
[SD Card Recording] Page
This page describes setting procedures related to
SD card recording.
This page can be used during access using
“admin” or “operator”.
0
Click [Advanced Settings] in the side menu, and
click [SD Card Recording].
0
Press the [OK] button to enable the new
settings.
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
0
The contents displayed vary according to the
value of the selected [Recording Mode].
Memo :
0
Only one channel for the H.264 video data will
be recorded to the SD card. Audio sound is not
recorded.
0
If the status of the [SD Card] is “No card”, all
buttons other than [OK] and [Cancel] cannot be
selected.
0
If SD card recording is set while FTP recording
is in progress, the recording process is
interrupted, and a dialog box appears prompting
you to switch to SD card recording. Pressing the
[OK] button stops FTP recording and starts SD
card recording.
0
If FTP recording is set while [SD Card
Recording] is set to “ON”, a dialog box will
appear. When this occurs, press the [OK] button
to set [Record Status] of [SD Card Recording] to
“OFF”.
0
Images recorded to the SD card can be played
back on the SD card operation screen by
clicking the [SD Card] button on the Built-in
Viewer screen.
p.85 [[SD Card] Operation Screen] )
0
[Encode Setting] cannot be changed while
recording to a SD card is in progress.
0
Distribution capability may deteriorate during
recording to the SD card, or playback or video
output from the card.
Note :
0
The SD cards cannot be formatted on this
camera. Make use of the SD Formatter (version
4.0 or later) distributed by the SD Association to
format the SD card, followed by inserting the
card into the camera.
The SD Formatter is available on the following
website.
https://www.sdcard.org/downloads/
[Advanced Settings] Page -[FTP Recording] Page
45
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
