9
Interval
This is available when both [Trigger1] and
[Trigger2] are set.
Specify the maximum interval between each
trigger for [Trigger1] and [Trigger2].
Starts alarm recording if [Trigger2] occurs within
the maximum time interval after [Trigger1] has
occurred.
[Set values: 1 to 3600]sec
Memo :
0
If an invalid value is set, a dialog box indicating
“Invalid interval” appears. If the interval field is
left blank, a dialog box indicating “Interval field
is blank” appears.
9
Trigger2
For selecting the second trigger for starting alarm
recording.
[Set values:
R
Disable, Pin Input1 Make, Pin Input1
Break, Pin Input2 Make, Pin Input2 Break]
Memo :
0
If the same setting is specified for [1st Trigger]
and [2nd Trigger], a dialog box indicating
“Duplicate setting between Trigger 1 and
Trigger 2” appears, and alarm recording will not
start.
9
Position Number
For setting the camera’s preset position number.
This is enabled when “Position” is selected for the
trigger in [Trigger1].
Executes action recording upon moving to the
entered position.
[Set values: 0 to 99]
Memo :
0
Specify the setting for Preset Position in [PTZ
Settings] of Built-in Viewer.
0
This position parameter remains valid during
manual pan/tilt/zoom (PTZ) operations.
9
Easy Day/Night
This is enabled when “Easy Day/Night” is selected
for the [Trigger1] item.
0
Color:
Executes alarm recording when the image
switches from black-and-white to color.
0
Black & White:
Executes alarm recording when the image
switches from color to black-and-white.
[Set values:
R
Color, Black & White]
9
Time
Displayed when “Time” is selected in [Trigger1].
Executes alarm recording at the time you have
entered.
[Set values: 00H00M to 23H59M]
Encode Setting
Select the H.264 encoder No. for performing SD
card recording.
Specify the encoding settings in the [Encoding]
page.
Memo :
0
Recordable frame rates are limited to 5, 10, 15,
and 30 fps. If a frame rate other than those above
is specified, a dialog box appears, and recording
will not start. If this occurs, review and adjust the
settings accordingly.
0
Set the I-frame interval to a value equivalent to
the frame rate. Otherwise, a dialog box will
appear.
48
[Advanced Settings] Page - [SD Card Recording] Page
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er
