JVC LST0728-001C, Instructions Manual

Page: 44 / 168

36
Basic Operation
This section describes the procedures for viewing live images by
controlling the mouse.
Displaying the [Live] Screen
1
Select [Live] from the main menu
●
The NVR Viewer starts up and the [Live] screen appears.
●
When the [Browse] or [Screen Setup] screen of the NVR
Viewer is displayed, click the [Live] tab.
●
To exit the NVR Viewer, click the [
⳯
] button.
●
If you have specified the camera record settings without closing
the [Live] screen, live images may not appear immediately after
you have exited the camera settings.
In this case,
A Unable to connect to the server! Reconnecting to
the server B or A Unable to connect to 127.0.0.1:80 on the device
name(camera name)! Reconnecting to the server B will appear
on the [Live] screen. (127.0.0.1:80 is the internal IP address of
this unit that is currently in operation.)
Memo :
●
Depending on the condition of the network circuit, it may take
some time before images from the camera are displayed.
●
Depending on the connection of the additional hard disk, several
minutes may be required for the [Live] screen to appear.
Select a View
For details on the view settings, refer to [Screen Setup]
(
A Page 60).
1
Select a view from the [Views] section, or from
the view list at the upper end of the window
Note :
●
Do not switch the view frequently within a short time interval.
●
When live images do not appear on VN-C625U/VN-C655U, set
the password for connecting VN-C625U/VN-C655U on the
camera unit as well as this unit again. For details on the setting
procedures, refer to the [INSTRUCRTIONS] of the camera in
use and procedures for setting the root password on the [Edit
device settings] screen in this manual (
A Page 87).
●
The audio setting is restored to
A
No Audio Sources
B
when you
return from the setting screen to [Live]. Set the audio parameters
again.
Select a Camera
1
Select a camera by clicking on the bar at the
upper end of the screen of the camera to select
using the mouse
●
When you have selected a camera, the blue bar at the top
of each live image changes to a lighter blue tone.
Viewing Live Images via
Mouse Control
[Live] Screen
View List
[Views] Section
[Live] Tab [
⳯
] Button
A
B
C
D
[Event] Section
[PTZ Control] Section
[Outputs...] Section
[Audio] Section
[Live] Screen