JVC LST0728-001C, Instructions Manual

Page: 143 / 168

135
䡵
List of Status that can be Obtained from this Unit
iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrObjects(1)
䡵
List of TRAP Supported by this Unit
iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrTraps(2)
Group Identifier Name
SYNTAX MAX-ACCESS UNITS
Explanation
Current Value nvrStausGroup(1)
1 nvrRecStatus
INTEGER {
off(0),
on(1)
}
read-only - REC status
2 nvrRecMode
INTEGER {
off(0),
recCtrl(1),
recAll(2)
}
read-only - REC mode
3 nvrLastAlarmDate DateAndTime read-only -
Latest alarm date
4 nvrCpuUsage INTEGER(0..100) read-only %
CPU usage rate
5 nvrDdriveWrite
INTEGER(0..
4294967295)
read-only
Byte/
Sec Writing rate to D
drive
6 nvrRunViewer
INTEGER {
stop(0),
run(1)
}
read-only -
Viewer execution
status
Warning List nvrWarningGroup(2)
1 nvrWarningTable
SEQUENCE OF
nvrWarningEntry
not-accessible -
Table of last 10
warnings
1.1 nvrWarningEntry
nvrWarningEntry
INDEX {
nvrWarningIndex
}
not-accessible -
Entries of last 10
warnings
1.1.1 nvrWarningIndex INTEGER(1..10) read-only - Index of warning list
1.1.2 nvrWarningDate DateAndTime read-only -
Dates when
warnings occurred
1.1.3 nvrWarningInfo DisplayString read-only
- Warning information
Camera List nvrCameraGroup(3)
1 nvrRegistCameraTable
SEQUENCE OF
nvrRegistCameraEntry
not-accessible -
Table of 32
connected cameras
1.1 nvrRegistCameraEntry
nvrRegistCameraEntry
INDEX {
nvrRegCamIndex
}
not-accessible -
Entries of 32
connected cameras
1.1.1 nvrRegCamIndex INTEGER(1..32) read-only -
Index of connected
cameras list
1.1.2 nvrRegCamIpAddress IpAddress read-only -
IP addresses of
connected cameras
1.1.3 nvrRegCamName DisplayString read-only -
Camera names
1.1.4
nvrRegCamConnectio
n
INTEGER {
disconnect(0),
connect(1)
}
read-only -
Camera connection
status
Identifier Name
OBJECTS STATUS
Explanation
1
nvrRecStatusChange nvrRecStatus,
nvrRecMode current Notification of REC status change
2 nvrNotifyAlarm nvrAlarmDate current
Notification of alarm occurrence
3
nvrNotifyWarning nvrWarningIndex,
nvrWarningDate,
nvrWarningInfo current Notification of warning occurrence
4
nvrNotifyCamConnect nvrRegCamIndex,
nvrRegCamIpAddress,
nvrRegCamName,
nvrRegCamConnection current Notification of camera connection
status change