JVC LST0728-001C, Instructions Manual

Page: 111 / 168

103
Camera Output Settings
You can assign external outputs specified on the [I/O Setup] screen
to a camera, such as sounding of a siren or switching on of lights.
●
The assigned outputs can be triggered automatically when
motion is detected, or manually by pressing the output buttons.
●
You can display the [Output Settings] screen by clicking the
[Outputs...] button on the [Camera Recording Administator]
screen (
A Page 55).
䡵
Specifying Output During Manual Control
You can specify outputs to be triggered manually using the output
button or from a list on the [Live] screen.
1
Select an output from the [All Output] list
2
Click the button between the [All Output]
and [On Manusl Control] lists
●
Doing so copies the selected output to the [On Manusl
Control] list.
●
You can use the Up/Down buttons at the top right corner
of the [On Manusl Control] list to move the selected output
upward/downward within the [On Manusl Control] list.
●
To delete an output from the [On Manusl Control] list,
select the output and click the
button between the [All
Output] and [On Manusl Control] lists.
䡵
Specifying Output via Motion Detection
You can specify outputs to be triggered automatically when motion
is detected.
1
Select an output from the [All Output] list
2
Click the button between the [All Output]
and [On Motion Detected] lists
●
Doing so copies the selected output to the [On Motion
Detected] list.
●
To delete an output from the [On Motion Detected] list,
select the output and click the
button between the [All
Output] and [On Motion Detected] lists.
[Output Settings] Screen
[Output Settings] Screen
[Output Settings] Screen