JVC CA-DD3 Instructions Manual Download Page 148

Page: 148 / 168

• DLNA CERTIFIED

Audio/Video/Image Player

• This system complies with DLNA Guidelines 1.0.
• You can play back the following file types using

the network function of this system.

LPCM, WAV, MP3, WMA, JPEG, ASF, DivX,
MPEG1, MPEG2

NOTE

• “DLNA” stands for “Digital Living Network Alli-

ance”. Refer to the following website for details.
http://www.dlna.org/

CyberLink Media Server is a registered trademark along with other company and product names mentioned
in this publication, used for identification purposes and remain the exclusive property of their respective own-
ers.

DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living Network Alliance.

Microsoft, Windows, Windows XP are registered trademarks or trademarks of Microsoft Corporation in the
United States and other countries.

Information on DLNA

DD-83[A_UX]-gpage.fm Page 1 Friday, September 8, 2006 4:43 PM

Summary of Contents for CA-DD3









































































































































































Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands

JVC CA-DD3, Instructions Manual

Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands