JVC CA-DD3 Instructions Manual Download Page 108

Page: 108 / 168

sic ope

rat

Press [DIMMER].

• Each time you press [DIMMER], the display

changes in the display window as follows.
- “DIMMER 1”

The display window becomes darker than the
normal display brightness.

- “DIMMER 2”

The display window becomes darker than
“DIMMER 1”.

- “DIMMER AUTO”

When a video disc/file is played back, the dis-
play window becomes darker automatically.

- “DIMMER OFF”

The normal display brightness is restored.

When the time you specify elapses, the main unit
automatically turns off.

Press [SLEEP].

• Each time you press [SLEEP], the time indicated

in the display window changes. You can set the
time to 10, 20, 30, 60, 90, 120 or 150 minutes.

Example : Display when the sleep timer is set

to 60 minutes

NOTE

• When the sleep timer is activated, the display

window becomes darker automatically.

Press [SLEEP] repeatedly to select the
time again.

Press [SLEEP] once.

Press [SLEEP] repeatedly until
“SLEEP” disappears.

NOTE

• Turning off the main unit cancels the sleep timer.

Changing the brightness of
the display window

Using the sleep timer

Changing the remaining time

Confirming the remaining time

Canceling the sleep timer

Basic operations (continued)

DD-831[A_Ux].book Page 19 Wednesday, August 30, 2006 11:48 AM

Summary of Contents for CA-DD3









































































































































































Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands

JVC CA-DD3, Instructions Manual

Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands