JVC CA-DD3 Instructions Manual Download Page 117

Page: 117 / 168

Bas

era

tions

of disc

ile

pla

■

When a disc/file is played back

Press

When playback is stopped in the middle, playback
can be started from the stopped position.

■

When a disc/file is played back

Follow any of the operations below.

*1 “RESUME” is displayed in the display window.

After this operation, the position where playback
has been stopped is stored even when the main
unit is turned off by pressing [

AUDIO].

*2 This operation does not work for a CD.

Press [DVD/CD

] .

NOTE

• This function does not work in program playback

or random playback.

• You can deactivate the resume playback func-

tion. (Refer to“RESUME” on page 40.)

Press

twice.

NOTE

• The stored position is also cleared if the disc tray

is opened.

■

When a disc/file is played back

Press

• Press [DVD/CD

] or [USB

] to return to the

normal playback.

■

When a disc/file is paused

Press

repeatedly.

Stopping playback

Resuming playback

Press

once.

Press [

AUDIO] to turn off the main unit.

(only for the loaded disc)

Temporarily stopping playback

Starting playback from the stored
position

Clearing the stored position

Pausing playback

Advancing the picture frame
by frame

For the locations of the remote
control buttons, refer to page 23.

DD-831[A_Ux]-06.fm Page 28 Friday, October 13, 2006 11:03 AM

Summary of Contents for CA-DD3









































































































































































Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands

JVC CA-DD3, Instructions Manual

Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands