JVC CA-DD3 Instructions Manual Download Page 56

Page: 56 / 168

English

ren

• The system supports DivX 5.x, 4.x and 3.11.
• The system supports DivX files with a resolution

of 720 x 480 pixels or less (30 fps) and 720 x
576 pixels or less (25 fps).

• Audio stream should conform to MPEG1 Audio

Layer-2 or MPEG Audio Layer-3 (MP3).

• The system does not support GMC (Global

Motion Compression).

• Files encoded in the interlaced scanning mode

may not be played back correctly.

• Playing back a DivX file may take a long time.

The elapsed time is not displayed until playback
starts. The elapsed time may also not be dis-
played correctly.

• The stream structure of MPEG1/MPEG2 discs

and files should conform to MPEG system/pro-
gram stream.

• 720 x 576 pixels (25 fps)/720 x 480 pixels (30

fps) is recommended for the highest resolution.

• This system also supports the resolutions of

352 x 576/480 x 576/352 x 288 pixels (25 fps)
and 352 x 480/480 x 480/352 x 240 pixels
(30 fps).

• The profile and level should be MP@ML (Main

Profile at Main Level)/SP@ML (Simple Profile at
Main Level)/MP@LL (Main Profile at Low Level).

• Audio streams should conform to MPEG1 Audio

Layer-2, MPEG2 Audio Layer-2 or Dolby Digital
(MPEG2 only).

The Non-DVD side of a “DualDisc” does not com-
ply with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc
on this product may not be recommended.

• JVC bears no responsibility for any loss of data

on the USB mass storage class device while
using this system.

• This system is compatible with USB 2.0 Full-

Speed.

• Tracks coded or encrypted using a special

method cannot be played on the system.

• Some portable audio players are not compatible

with the system.

• This system may not play back some USB mass

storage class devices and does not support
DRM (Digital Rights Management).

Notes on DivX discs/files

Notes on MPEG1/MPEG2 discs/
files

Caution for DualDisc playback

Notes on files recorded on a
connected USB mass storage class
device

Notes on discs/files (continued)

DD-83[J].book Page 51 Tuesday, October 10, 2006 3:25 PM

Summary of Contents for CA-DD3









































































































































































Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands

JVC CA-DD3, Instructions Manual

Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands