JVC CA-DD3 Instructions Manual Download Page 103

Page: 103 / 168

Prep

rat

Press

to select the video

signal type suitable for the TV.

• When the TV is connected to the [VIDEO]

terminal or the [S-VIDEO] terminal, the
video signal type can be selected as
instructed below.
- Select “PAL 576I” for a TV only compatible

with PAL interlaced video signal.

- Select “PAL 576P” for a TV equipped with

a component terminal and compatible with
PAL progressive video signal.

- Select “NTSC 480I” for a TV only compati-

ble with NTSC interlaced video siginal.

- Select “NTSC 480P” for a TV equipped

with a component terminal and compatible
with NTSC progressive video signal.

• When the TV is connected to the [HDMI] ter-

minal, the video signal type can be selected
as instructed below. (Only for DD-8 and DD-3)
- Select “AUTO” for normal usage (the initial

setting).*

- Select “PAL 576P”, “PAL 720P”,

“NTSC 480P” or “NTSC 720P” as needed.

NOTE

* The “AUTO” setting works only for a TV compat-

ible with PAL video signal. Select “NTSC 480P”
or “NTSC 720P” for a TV equipped with an HDMI
terminal and compatible with NTSC video signal.

• “480”, “576” and “720” refer to the number of the

scanning lines. Generally, the larger the number,
the better picture that can be obtained.

• “I” refers to the interlaced format. “P” refers to

the progressive format. A better picture can be
obtained in the progressive format than in the
interlaced format.

• When an HDMI video signal is output, the

“HDMI” indicator lights up in the display window.

• When an HD video signal (720p) is output, the

“HD” indicator lights up.

• When “PAL 576P”, “PAL 720P”, “NTSC 480P” or

“NTSC 720P” is selected, the “PROGRESSIVE”
indicator lights up in the display window.

Press [ENTER].

• The selected video signal type is displayed

in the display window for a short time.

NOTE

• The picture may be distorted when you press

[ENTER], but this is not a malfunction of the sys-
tem.

• To check the compatibility of your TV, contact

your local JVC customer service center.

• All JVC-manufactured progressive TVs and

high-definition TVs are fully compatible with this
system.

• Even if the main unit is turned off, the video sig-

nal type setting is stored.

To view an image on the TV, select the monitor out
type as well as the video signal type.

Press [SETTING].

Press

to display “M.OUT”.

Press

to select “HDMI” or

“NO HDMI”.

• When using an HDMI cable to connect a TV

to the main unit, select “HDMI”.

• When an HDMI cable is not connected,

select “NO HDMI” (the initial setting).

Press [ENTER] or wait for a short
time.

Selecting the monitor out type

DD-831[A_Ux]-03.fm Page 14 Friday, October 13, 2006 11:10 AM

Summary of Contents for CA-DD3









































































































































































Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands

JVC CA-DD3, Instructions Manual

Search results

Summary of Contents for CA-DD3

Reviews:

Related manuals for CA-DD3

Brands by name

Popular brands