Juniper XRE200 -, Hardware Manual

Page: 62 / 188

XRE200 Management Cable Specifications and Pinouts
IN THIS SECTION
USB Port Specifications for an XRE200 External Routing Engine | 62
Console Port Connector Pinout Information | 63
RJ-45 Management Port Connector Pinout Information | 63
Virtual Chassis Port Connector Pinout Information for RJ-45 Connections on an XRE200 External Routing
Engine | 64
USB Port Specifications for an XRE200 External Routing Engine
The following Juniper Networks USB flash drives have been tested and are officially supported for the
XRE200 External Routing Engine:
•
RE-USB-1G-S
•
RE-USB-2G-S
•
RE-USB-4G-S
CAUTION: Any USB memory product not listed as supported for XRE200 External
Routing Engines has not been tested by Juniper Networks. The use of any unsupported
USB memory product could expose your external Routing Engine to unpredictable
behavior. Juniper Networks Technical Assistance Center (JTAC) can provide only
limited support for issues related to unsupported hardware. We strongly recommend
that you use only supported USB flash drives.
All USB flash drives used on XRE200 External Routing Engines must have the following features:
•
USB 2.0 or later
•
Formatted with a FAT or MS-DOS file system
62