Juniper XRE200 -, Hardware Manual

Page: 27 / 188

•
Fans and chassis temperature
•
Junos OS version installed
The maintenance mode allows you to cycle through options for configuring and troubleshooting the switch:
•
System halt
•
Reboot system
•
Load rescue configuration
•
Revert to factory configuration
•
EZSetup
NOTE: The EZSetup option is displayed in the LCD menu, but EZSetup is not supported for
XRE200 External Routing Engines.
LCD Panel Menus
The LCD panel has three menus: Idle, Status, and Maintenance.
Toggle between the LCD menus by pressing the Up (↑) and Down (↓) buttons. Enter the Status or
Maintenance menu by pressing the Enter ( ✓ ) button.
Within the Status or Maintenance menu, toggle between the options by pressing the Up (↑) and Down
(↓) buttons. Select the menus that can be selected by pressing the Enter (
✓
) button. Exit the current menu
and return to the previous menu by pressing the Cancel (X) button.
Table 6 on page 28 describes the LCD panel menu options.
27