Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Manual Download Page 186

Page: 186 / 246

STRM Users Guide

180

ANAGING

SSETS

Step 4

Click

Browse

to search for the CSV file you wish to import.

Step 5

Click

Import Assets

to begin the import process.

Exporting Assets

To export assets in XML or CSV format:

Step 1

Click the

Assets

tab.

The Assets window appears.

Step 2

In the navigation menu, click

Asset Profiles

The Assets panel appears.

Step 3

Search for asset profiles.
For more information on searching asset profiles, see

Searching Asset Profiles

Step 4

From the Actions drop-down list box, select one of the following options:

•

Export to XML

•

Export to CSV

The export window appears.

Step 5

Choose one of the following options:

•

Open with

- Allows you to open the export results in your choice of browser.

•

Save to Disk

- Allows you to save the results to your desktop.

Step 6

Click

Summary of Contents for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1























































































































































































































































Search results

Summary of Contents for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Reviews:

Related manuals for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Brands by name

Popular brands

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1, Manual

Search results

Summary of Contents for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Reviews:

Related manuals for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1

Brands by name

Popular brands