Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

Page: 688 / 1016

Detect and Resolve Configuration Conflicts
The Detect/Resolve Configuration Conflicts screen displays all the devices that are
associated with the selected port template. To detect and resolve conflicts:
1.
Select the devices from the list.
2.
To resolve conflicts, select
Remove Conflicts in Configuration
.
3.
Click
OK
. The port configuration conflicts are detected or resolved and the results
are displayed.
4.
Click OK to confirm.
5.
The Launch Update Device screen is displayed with a list of modified devices. To
update the device configuration immediately, select Update Device now and click
OK .
Clone a Port Template
To customize a port template’s CoS parameters:
1.
Select the predefined port template from the list and click the Customize Port
Template button and choose Clone to new Port Template . The Customize Port
Template screen is displayed.
NOTE: As an administrator, you can create port templates using the Customize Port
Template feature.
2.
To modify the default template name, type a name in the
Template Name
field.
3.
To modify the default description, type a description in the
Description
field.
4.
To modify the default scheduler map name, type a name in the
Scheduler Map
Name
field.
5.
To edit scheduler settings, click
Edit Scheduler
. The Edit Scheduler screen is displayed.
Specify the following:
• Scheduler name
•
Transmit Rate—Select one:
Unconfigured
if you do not want to configure the
parameter,
Percent
and enter a value, or
Remainder
to assign the remaining
bandwidth available.
• Buffer Size—Transmit Rate—Select one: Unconfigured if you do not want to
configure the parameter, Percent and enter a value, or Remainder to assign the
remaining buffer available.
• Priority—Select a value from the list.
Click
OK
to save the settings or
Cancel
to cancel all modifications.
6.
Click
Save
to create the customized port template.
Copyright © 2010, Juniper Networks, Inc. 638
Network and Security Manager Administration Guide