Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

Page: 175 / 1016

Install and Configure a Junos Device
Before you can add a Junos device to NSM, the device must be installed and configured,
and logon credentials for an NSM administrator must be configured for it. Perform the
following steps:
1.
Connect the device to the network and configure one of the interfaces so that the
device can reach the NSM device server.
2.
Add a user for NSM that has full administrative rights.
For complete details on installing and configuring Junos devices, see the documentation
for the specific device,
Add the Device in NSM
To add the device in the NSM UI, follow these steps:
1.
From the domain menu, select the domain in which you want to import the device.
2.
In Device Manager, select Devices .
3.
Click the Add icon and select Device to open the Add Device wizard.
4.
Select Device Is Not Reachable , and then click Next .
5.
On the Specify Name, Color, OS Name, Version, and Platform screen:
• Enter a name and select a color to represent the device in the UI.
•
From the OS Name list, select
Junos
.
The Junos OS Type list appears.
• Select the Junos OS type for the device you want to add:
•
To add a J Series or SRX Series device or an SRX virtual chassis, select J/SRX
Series from the list.
• To add an EX Series device or virtual chassis, select EX Series .
•
To add an M Series or MX Series device, select M/MX Series .
• From the Platform list, select the device platform name.
•
Check the Virtual Chassis box if you are adding an EX Series virtual chassis made
up of several EX Series switches (EX4200 series only) or an SRX virtual chassis..
•
From the Managed OS Version list, select the version of the operating system that
runs on the device.
•
Select the Device Server Connection Parameters: Use the default settings to
configure the device to connect to the NSM Device Server IP address and port.
Use a MIP to configure the device to connect to the NSM Device Server through a
mapped IP address and port.
• Click Next .
125 Copyright © 2010, Juniper Networks, Inc.
Chapter 4: Adding Devices