Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

Page: 75 / 1016

Main Display Area
The main display area displays content for the selected module, module contents, or
launch pad views. Launch pad views make use of otherwise blank panes to provide access
to commonly used functionality within the module.
Menu Bar
The menu bar contains clickable commands. You can access many menu bar commands
using keyboard shortcuts. For a complete list of keyboards shortcuts, see the
Network
and Security Manager Online Help .
Toolbar
The toolbar contains buttons for common tasks. The buttons displayed in the toolbar
are determined by the selected module.
Status Bar
The status bar displays additional information for a selected module.
NSM Modules
The navigation tree splits top-level modules into three panels:
•
Investigate Modules on page 25
• Configure Modules on page 27
• Administer Modules on page 31
Investigate Modules
The Investigate panel includes the following top-level modules:
• Log Viewer on page 25
•
Report Manager on page 26
•
Log Investigator on page 26
• Realtime Monitor on page 26
• Security Monitor on page 27
•
Audit Log Viewer on page 27
Log Viewer
The Log Viewer displays log entries that your security devices generate based on criteria
that you defined in your security policies, on the GUI Server, and in the device configuration.
Log entries appear in table format; each row contains a single log entry, and each column
defines specific information for a log entry.
You can select which log entries and what log information is shown using log filters or
by changing the column settings.
Use the Log Viewer to:
• View summarized information about security events and alarms.
•
View information about a specific log entry.
25 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Introduction to Network and Security Manager