Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

Page: 814 / 1016

2.
Select the following categories: Predefined , Custom , and Screen . Click OK to apply
your changes. The Log Viewer applies the filter to the log entries.
Filtering Log Entries by Column
Use the Filter Summary dialog box to select columns on which you want to filter log
entries. To filter on one or more columns:
1.
Select View > Filter Summary .
The Filter Summary dialog box is displayed.
2.
From the Filter Summary dialog box, select a column on which you want to filter log
entries.
3.
Select the filter settings you wish to apply for the specified column, then click OK .
4.
To select additional Log Viewer columns for filtering log entries, repeat Steps 1–3.
5.
Before you exit NSM, save the Filter Summary changes that you made in Log Viewer.
Figure 108 on page 765 shows the Filter Summary dialog box that you would use to
configure filtering by Device family column.
Copyright © 2010, Juniper Networks, Inc. 764
Network and Security Manager Administration Guide