manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.3 is a comprehensive software solution for managing network and security devices. Ensure smooth operations by referring to the detailed Administration Manual available for free download on manualshive.com. Stay up to date with the latest features and enhancements with this essential manual.

Share
Download
background image

NOTE:

For the NetScreen-5XT, the Combined port mode is supported only on the

NetScreen-5XT Elite (unrestricted users) platform.

See Figure 28 on page 107 for port, interface, and zone bindings.

Figure 28: Combined Port Mode Bindings

This mode provides the following bindings:

•

Binds the Untrusted Ethernet port to the ethernet4 interface, which is bound to the
Untrust zone.

•

Binds Ethernet port 4 to the ethernet3 interface, which is bound as a backup interface
to the Untrust zone (the ethernet4 interface is the primary interface to the Untrust
security zone).

•

Binds the Ethernet ports 3 and 2 to the ethernet2 interface, which is bound to the Home
zone.

•

Binds Ethernet port 1 to the ethernet1 interface, which is bound to the Work zone.

NOTE:

The serial interface is not available in Combined port mode.

Trust-Untrust-DMZ Port Mode

Trust/Untrust/DMZ mode binds interfaces to the Untrust, Trust and DMZ security zones,
enabling you to segregate Web, e-mail, or other application servers from the internal
network.

NOTE:

The Trust/Untrust/DMZ port mode is supported only on the NetScreen-5GT

Extended platform.

See Figure 29 on page 108 for port, interface, and zone bindings.

107

Copyright © 2010, Juniper Networks, Inc.

Chapter 4: Adding Devices

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.3

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.3

FARONICS DEVICE FILTER MAC Getting Started Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 4
IBM Nways 8260 Installation Instructions Manual preview
Nways 8260
Brand: IBM Pages: 25
Campbell PC208 Instruction Manual preview
PC208
Brand: Campbell Pages: 133
Palm SmartOffice SmartOffice Mobile User Manual preview
SmartOffice SmartOffice Mobile
Brand: Palm Pages: 29
Ricoh GlobalScan NX Server 5/Server 32/Server 750 Manual preview
GlobalScan NX Server 5/Server 32/Server 750
Brand: Ricoh Pages: 6
Nero Burning ROM 9 Manual preview
Burning ROM 9
Brand: Nero Pages: 95
Kinoma CLIE PEG-TJ27 Quick Start Manual preview
CLIE PEG-TJ27
Brand: Kinoma Pages: 6
ARRI Ramp Preview Controller Operation Manual preview
Ramp Preview Controller
Brand: ARRI Pages: 46
AVG ANTI-VIRUS 9 FREE - REV 90.15 User Manual preview
ANTI-VIRUS 9 FREE - REV 90.15
Brand: AVG Pages: 146
TYAN AST2050 User Manual preview
AST2050
Brand: TYAN Pages: 41
IBM Telelogic Directory Server Installation Manual preview
Telelogic Directory Server
Brand: IBM Pages: 26
UMAX Technologies PowerColor User Manual preview
PowerColor
Brand: UMAX Technologies Pages: 127
Oki B6100n Administration Manual preview
B6100n
Brand: Oki Pages: 106
Campbell CSIOPC Instruction Manual preview
CSIOPC
Brand: Campbell Pages: 24
Waves JJP Drums User Manual preview
JJP Drums
Brand: Waves Pages: 13
Canon BJC-S830D Application Manual preview
BJC-S830D
Brand: Canon Pages: 139
Omron FLEXXPECT-LABELLING Brochure preview
FLEXXPECT-LABELLING
Brand: Omron Pages: 2
Omron EST2-2C-MV4 Datasheet preview
EST2-2C-MV4
Brand: Omron Pages: 2

Brands by name

Popular brands

Load more brands