Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

Page: 802 / 1016

Table 101: Log Viewer Columns (continued)
Meaning Default Column
The version of the object that contained the device that
generated the log entry. No Dev Domain Ver
Name of the domain in which the device resides.
Note: The Log Viewer displays log entries for a single domain
at a time. By default, when logged in as the super
administrator, the Log Viewer displays log entries for managed
devices in the global domain. To change the domain, apply a
domain filter to view log entries for managed devices in a
specific domain.
No Device Domain
The family of the device that generated the log entry. No Device family
The name of the packet-centric outbound interface. No Dst Inf
The destination zone associated with a traffic log entry. Log
entry data for this column only appears after you update the
security device. No Dst Zone
The number of seconds that have elapsed since the beginning
of the current session. No Elapsed Secs
Specifies if this log has associated packet data. No Has Packet Data
A destination port that has undergone NAT and is associated
with the packet that has generated the log. No Nat Dst Port
A source port that has undergone NAT and is associated with
the packet that has generated the log. No Nat Src Port
The number of received packets for a given session on the
current port. No Packets In
Number of transmitted packets for a given session on the
current port. No Packets Out
Aggregate number of both received and transmitted packets
for a given session on the current port. No Packets Total
The policy in a specific domain version that generated the log. No Policy
The unique policy rule number that generated the log. This
policy number is constant in both ScreenOS and NSM. No Policy ID
A role group to which the user belongs. No Roles
The domain that contained the rule that generated this log. No Rule Domain
Copyright © 2010, Juniper Networks, Inc. 752
Network and Security Manager Administration Guide