Juniper NETWORK AND SECURITY MANAGER 2010.3, Administration Manual

Page: 242 / 1016

3.
For Secure Access, Infranet Controller, and Junos devices, select the Configuration
tab.
The device configuration tree appears in the left pane.
4.
In the device navigation tree, select a function heading to see device parameters,
and then select the configuration parameter you want to configure.
5.
Make your changes to the device configuration, then choose one of the following:
• Click OK to save your changes and close the device configuration.
•
Click Apply to save your changes and continue making changes.
• Click Cancel to discard all changes and close the device configuration.
To reset a device feature to its default value, right-click on the feature name in the device
editor and select
Revert to template/default value .
A brief overview of each device family follows. For details, see the referenced
device-specific documentation.
Configuring ScreenOS/IDP Device Features
The device configuration tree for a ScreenOS or IDP device looks similar to the example
in Figure 42 on page 192.
Figure 42: ScreenOS Device Object Configuration Data
Copyright © 2010, Juniper Networks, Inc. 192
Network and Security Manager Administration Guide