Juniper MX10016, Hardware Manual

Page: 275 / 320

Installation Instructions Warning
WARNING: Read the installation instructions before you connect the device to a power
source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die Stromquelle
anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema a la red de
alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
MX10016 Chassis Lifting Guidelines
The weight of a fully loaded MX10016 base AC configuration is approximately 522 lb (336.8 kg) and 596
lb (270.34 kg) for the redundant AC configuration. Similarly, the weight of a redundant DC configuration
is 591 lb (268.1 kg). Observe the following guidelines for lifting and moving a MX10016:
CAUTION: To avoid serious injury, do not attempt to move the MX10016 without a
mechanical lift.
279