Juniper MX10016, Hardware Manual

Page: 119 / 320

NOTE: If your laptop or PC does not have a DB-9 male connector pin and you want to connect
your laptop or PC directly to an MX10016 router, use a combination of the RJ-45 cable and RJ-45
to DB-9 adapter supplied with the device and a USB to DB-9 male adapter. You must provide the
USB to DB-9 male adapter.
Table 48: Console Port Connector Pinouts for an MX10016
Description Signal Pin
Request to send RTS output 1
Data terminal ready
Time of day for Precision Time Protocol
(PTP). You can use DTR pins as a TOD
universal asynchronous
receiver/transmitter (UART) by using
breakout cables.
DTR output
TOD output for PTP applications
2
Transmit data TxD output 3
Signal ground Signal oround 4
Signal ground Signal oround 5
Receive data RxD input 6
Data carrier detect
Time of day for PTP. You can use DCD
pins as a TOD UART by using breakout
cables.
DCD input
TOD iutput for PTP applications
7
Clear to send CTS input 8
USB Port Specifications for an MX10016
The following Juniper Networks USB flash drives have been tested and are officially supported for the
USB port in the MX10016 router:
•
RE-USB-1G-S—1-gigabyte (GB) USB flash drive
121