manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Release Note

The Juniper JUNOS 10.1 - S 5-13-2010 is a cutting-edge networking software, offering enhanced performance and security. Stay updated with the latest features and improvements by downloading the free Release Note manual from manualshive.com. Discover new possibilities and optimize your network effortlessly with this advanced product.

Share
Download
background image

[

System Basics Command Reference

]

Layer 2 Ethernet Services

■

Modification to the output of the show dhcp (relay or server) binding
commands

—The output of the 

show dhcp server binding summary

 command,

the 

show dhcp relay binding summary

 command, and the 

show dhcpv6 server

binding

 command has been modified to include the number of clients in the init

state and the requesting state.

[

Subscriber Access

]

MPLS Applications

■

MPLS statistics file now optional

—The 

file

 statement configured at the 

[edit

protocols mpls statistics]

 hierarchy level is now optional. You still must configure

the MPLS statistics statement to collect LSP statistics for the MPLS MIBs. Rather
than accessing the LSP statistics in the MPLS statistics file, you can view the
statistics using SNMP instead. This change helps to reduce disk space usage on
the routing engine, especially on routers on which numerous LSPs have been
configured.

[

MPLS

]

■

NSR tracing flags for MPLS

—You can now configure MPLS tracing flags for

nonstop active routing (NSR) synchronization events. This enables you to track
the progress of NSR synchronization between Routing Engines and record these
operations to a log file. To configure, include the 

flag nsr-synchronization

 or 

flag

nsr-synchronization-detail

 statement at the 

[edit protocols mpls traceoptions]

hierarchy level. The two statements are not mutually exclusive; you can track
the events at a high level and in detail.

[

High Availability

, 

MPLS

, 

Routing Protocols

]

46

■

Changes in Default Behavior and Syntax in JUNOS Release 10.1 for M Series, MX Series, and T Series Routers

JUNOS 10.1 Software Release Notes

Summary of Contents for JUNOS 10.1 - S 5-13-2010













































































































































































































Reviews:

No comments

Related manuals for JUNOS 10.1 - S 5-13-2010

Xerox DocuPrint N4025 User Manual preview
DocuPrint N4025
Brand: Xerox Pages: 129
On-Q/Legrand DA7559 User Manual preview
DA7559
Brand: On-Q/Legrand Pages: 14
Palm SmartOffice SmartOffice Mobile User Manual preview
SmartOffice SmartOffice Mobile
Brand: Palm Pages: 29
Adobe 65014293 - Photoshop CS4 - Mac Manual preview
65014293 - Photoshop CS4 - Mac
Brand: Adobe Pages: 87
SanDisk musicmatch User Manual preview
musicmatch
Brand: SanDisk Pages: 11
MACROMEDIA DRUMBEAT 2000 ECOMMERCE EDITION User Manual preview
DRUMBEAT 2000 ECOMMERCE EDITION
Brand: MACROMEDIA Pages: 238
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Brand: Microtek Pages: 177
Campbell PC400 User Manual preview
PC400
Brand: Campbell Pages: 250
Elgato EyeTV Hybrid Hardware Reference Manual preview
EyeTV Hybrid
Brand: Elgato Pages: 5
Avocent DSR Series DSR1021 Quick Installation Manual preview
DSR Series DSR1021
Brand: Avocent Pages: 2
Zing Magic Checkers User Manual preview
Checkers
Brand: Zing Magic Pages: 10
3Com 3C15500 - Network Director - PC User Manual preview
3C15500 - Network Director - PC
Brand: 3Com Pages: 924
ACT ACTWIN PRO Manual preview
ACTWIN PRO
Brand: ACT Pages: 124
Genius KIDSBALL Manual preview
KIDSBALL
Brand: Genius Pages: 7
Genius F509 User Manual preview
F509
Brand: Genius Pages: 11
Autodesk AUTOCAD MAP 3D Brochure preview
AUTOCAD MAP 3D
Brand: Autodesk Pages: 4
Autodesk ALIAS SURFACE Brochure preview
ALIAS SURFACE
Brand: Autodesk Pages: 10
IBM Hub/Switch Installation Manual preview
Hub/Switch
Brand: IBM Pages: 590

Brands by name

Popular brands

Load more brands