manualshive.com logo in svg

Juniper JUNOS 10.1 - S 5-13-2010, Release Note

The Juniper JUNOS 10.1 - S 5-13-2010 is a cutting-edge networking software, offering enhanced performance and security. Stay updated with the latest features and improvements by downloading the free Release Note manual from manualshive.com. Discover new possibilities and optimize your network effortlessly with this advanced product.

Share
Download
background image

Application Layer Gateways (ALGs)

■

The following CLI commands have been removed as part of RPC ALG data
structure cleanup:

■

clear security alg msrpc portmap

■

clear security alg sunrpc portmap

■

show security alg msrpc portmap

■

show security alg sunrpc portmap

■

The 

show security alg msrpc object-id-map

 CLI command has a chassis cluster

node option to permit the output to be restricted to a particular node or to query
the entire cluster. The 

show security alg msrpc object-id-map node

 CLI command

options are 

<node-id | all | local | primary>

.

Chassis Cluster

■

On SRX650 devices in chassis cluster mode, the T1/E1 PIC goes offline and does
not come online.

■

The automatic pause timer functionality related to IP address monitoring for
redundancy groups has been removed. Instead, a configurable 

hold-down-interval

timer for all redundancy groups has been instituted. See the “Configuring a
Dampening Time Between Back-to-Back Redundancy Group Failovers” section
of the 

JUNOS Software Security Configuration Guide

.

■

IP address monitoring on redundancy group 0 is now supported.

■

The 

chassis cluster redundancy-group 

group-number

 ip-monitoring threshold

 CLI

command has been removed. Instead, use the 

chassis cluster redundancy-group

group-number

 ip-monitoring global-threshold

 command.

■

IP address monitoring on virtual routers is now supported.

118

■

Changes In Default Behavior and Syntax in JUNOS Release 10.1 for SRX Series Services Gateways and J Series Services

Routers

JUNOS 10.1 Software Release Notes

Summary of Contents for JUNOS 10.1 - S 5-13-2010













































































































































































































Reviews:

No comments

Related manuals for JUNOS 10.1 - S 5-13-2010

Raymarine RayTech RNS 5.0 User Manual preview
RayTech RNS 5.0
Brand: Raymarine Pages: 152
MACROMEDIA FLEX-CREATING ADVANCED COMPONENTS Manual preview
FLEX-CREATING ADVANCED COMPONENTS
Brand: MACROMEDIA Pages: 24
BrainMaster BMrMMP User Manual preview
BMrMMP
Brand: BrainMaster Pages: 14
MACROMEDIA COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION... Getting Started preview
COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION...
Brand: MACROMEDIA Pages: 134
SSI TROPOS SUPERSEARCH 2.4.0.000 Installation Manual preview
TROPOS SUPERSEARCH 2.4.0.000
Brand: SSI Pages: 8
Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual preview
ETERNUS VSS Hardware Provider 2.1
Brand: Fujitsu Pages: 134
Fujitsu ATLAS V14 User Manual preview
ATLAS V14
Brand: Fujitsu Pages: 302
Fujitsu PFU Rack2-Filer User Manual preview
PFU Rack2-Filer
Brand: Fujitsu Pages: 463
Fujitsu Eternus web GUI User Manual preview
Eternus web GUI
Brand: Fujitsu Pages: 635
Fujitsu ETERNUS User Manual preview
ETERNUS
Brand: Fujitsu Pages: 64
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
Mobile Crossing WayPoint Map Loader User Manual preview
WayPoint Map Loader
Brand: Mobile Crossing Pages: 32
RedMoon Music maxWerk User Manual preview
maxWerk
Brand: RedMoon Music Pages: 74
Avaya PARTNER ACS R5.0 Getting Started Manual preview
PARTNER ACS R5.0
Brand: Avaya Pages: 32
Silicon Image SataRaid User Manual preview
SataRaid
Brand: Silicon Image Pages: 36
Tech Source RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND Brochure preview
RAPTOR 2100T - RAPTOR DRIVERS FOR LINUX INSTALLATION AND
Brand: Tech Source Pages: 2
LEI Extras FISHEASY ST - Addendum preview
FISHEASY ST -
Brand: LEI Extras Pages: 8
Oracle 5.0 Reference Manual preview
5.0
Brand: Oracle Pages: 3232

Brands by name

Popular brands

Load more brands