Jungheinrich ETVC 16, Operating Instructions Manual

Page: 39 / 89

1005
.G
B
E 6
3 Start-up of truck
F
The driver must make sure that nobody is within the danger area of the truck, before
the truck is switched on or operated, or before a load is lifted.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and load devices) for dama-
ges and wear.
– Check the load chains for uniform tension.
– Visually check the security of the battery and the cable connections.
Adjusting the driver seat
Z
To ensure optimum shock absorption, the driver seat must be adjusted to the weight
of the driver.
The driver seat must not be occupied while being adjusted to the driver weight.
Setting the driver weight:
– Pull the lever (8) in the direction indi-
cated by the arrow and release it
again.
Z
The previously set driver weight is reset
to the minimum value.
Setting range for the shock absorption:
50 kg to 130 kg.
– Pull the lever (8) again in the direction
indicated indicated by the arrow until
reaching the appropriate weight mark
on the scale (18). Then release the
lever again.
– Sit down on the driver seat.
F
Do not reach between the seat and the chassis wall/overhead guard.
Adjusting the backrest:
– Pull the locking lever (9) upward and adjust the inclination of the backrest (19).
– Release the locking lever again, the backrest is locked in position.
Adjusting the seat position:
– Pull the locking lever (7) of the driver’s seat adjustment up in direction of the arrow
and slide the seat backwards or forwards into the desired seating position.
– Let the locking lever (7) engage again.
F
The driver seat locking system must be properly engaged in the set position. The
position of the seat must not be changed while driving!
Z
The driver seat adjusting mechanism shown relates to the standard version. For all
different designs the adjusting instructions as supplied by the manufacturer apply.
When performing the seat adjustments, ensure that all operating controls are within
easy reach.
9
18 8
7
19
1005
.G
B
E 6
3 Start-up of truck
F
The driver must make sure that nobody is within the danger area of the truck, before
the truck is switched on or operated, or before a load is lifted.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and load devices) for dama-
ges and wear.
– Check the load chains for uniform tension.
– Visually check the security of the battery and the cable connections.
Adjusting the driver seat
Z
To ensure optimum shock absorption, the driver seat must be adjusted to the weight
of the driver.
The driver seat must not be occupied while being adjusted to the driver weight.
Setting the driver weight:
– Pull the lever (8) in the direction indi-
cated by the arrow and release it
again.
Z
The previously set driver weight is reset
to the minimum value.
Setting range for the shock absorption:
50 kg to 130 kg.
– Pull the lever (8) again in the direction
indicated indicated by the arrow until
reaching the appropriate weight mark
on the scale (18). Then release the
lever again.
– Sit down on the driver seat.
F
Do not reach between the seat and the chassis wall/overhead guard.
Adjusting the backrest:
– Pull the locking lever (9) upward and adjust the inclination of the backrest (19).
– Release the locking lever again, the backrest is locked in position.
Adjusting the seat position:
– Pull the locking lever (7) of the driver’s seat adjustment up in direction of the arrow
and slide the seat backwards or forwards into the desired seating position.
– Let the locking lever (7) engage again.
F
The driver seat locking system must be properly engaged in the set position. The
position of the seat must not be changed while driving!
Z
The driver seat adjusting mechanism shown relates to the standard version. For all
different designs the adjusting instructions as supplied by the manufacturer apply.
When performing the seat adjustments, ensure that all operating controls are within
easy reach.
9
18 8
7
19