Jungheinrich ETVC 16 Operating Instructions Manual Download Page 2 | Manualshive

Page: 2 / 89

background image

1

0903

.GB

Important notes on transporting and mounting load lifting devices
to reach trucks

Transport

Depending on the overall height of the lifting mast and the local conditions transport
can be performed in three different ways

– Standing, with the lifting mast mounted (for trucks with low overall height)
– Standing, with martially mounted lifting mast tilted towards the overhead guard (for

trucks with medium overall height). Hydraulic line for the lifting function is interrup-
ted.

– Standing, with the lifting mast dismounted (for trucks with large overall height)

Safety Instructions for Assembly and Commissioning

f

The assembly of the truck on site, commissioning the truck and instructing the driver
must be carried out by personnel trained and authorised by the manufacturer

Connect the hydraulic lines to the basic machine / mast interface and commission the
truck only after having installed the mast as per the instructions.

1

0903

.GB

Important notes on transporting and mounting load lifting devices
to reach trucks

Transport

Depending on the overall height of the lifting mast and the local conditions transport
can be performed in three different ways

– Standing, with the lifting mast mounted (for trucks with low overall height)
– Standing, with martially mounted lifting mast tilted towards the overhead guard (for

trucks with medium overall height). Hydraulic line for the lifting function is interrup-
ted.

– Standing, with the lifting mast dismounted (for trucks with large overall height)

Safety Instructions for Assembly and Commissioning

f

The assembly of the truck on site, commissioning the truck and instructing the driver
must be carried out by personnel trained and authorised by the manufacturer

Connect the hydraulic lines to the basic machine / mast interface and commission the
truck only after having installed the mast as per the instructions.

«
1
2
3
4
...
»

Summary of Contents for ETVC 16


























































































Reviews:

No comments

Related manuals for ETVC 16

Brand: Eagle Pages: 166

Brand: Paccar Pages: 40

Brand: Komatsu Pages: 6

Brand: Volvo Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands