Jungheinrich ETVC 16, Operating Instructions Manual

Page: 67 / 89

120
7.GB
F 10
6.5 Checking the hydraulic oil level
– Prepare the truck for servicing and
maintenance (refer sections 6.1).
– Open the seat hood (see section 6.4).
– Check the hydraulic oil level in the
hydraulic reservoir (8)
Z
The oil level must be checked at the
hydraulic reservoir with the load lifting
device completely lowered.
– If necessary, top up through the filler
neck (9) using oil of the correct speci-
fication.
For the hydraulic oil specification
(refer section 5.1).
– Lock the seat hood again and screw in
the securing screw.Lock the seat hood
again and screw in the securing
screw.
6.6 Checking the brake fluid level
F
Brake fluid is poisonous and must there-
fore be stored in the closed original con-
tainers.
Z
Lack of brake fluid is indicated by a red
LED on the information and service dis-
play.
– Park and secure the truck (refer to
chapter E).
– Visually check the brake fluid level on
the brake fluid reservoir (10); if neces-
sary, add brake fluid (refer section
5.1).
Z
The brake fluid level must be visible bet-
ween the “Min.” and “Max.” marks.
M
Replaced oils and lubricants must be disposed of as specified by the applicable en-
vironment protection laws.
6.7 Check fixing of the wheels
– Park the truck and render it safe (see chapter E).
– Tighten wheel bolts cross-wise with a torque wrench.
Torque
Driven wheels M
A
= 195-10 Nm
Rear wheels M
A
= 195-10 Nm
8
9
10
120
7.GB
F 10
6.5 Checking the hydraulic oil level
– Prepare the truck for servicing and
maintenance (refer sections 6.1).
– Open the seat hood (see section 6.4).
– Check the hydraulic oil level in the
hydraulic reservoir (8)
Z
The oil level must be checked at the
hydraulic reservoir with the load lifting
device completely lowered.
– If necessary, top up through the filler
neck (9) using oil of the correct speci-
fication.
For the hydraulic oil specification
(refer section 5.1).
– Lock the seat hood again and screw in
the securing screw.Lock the seat hood
again and screw in the securing
screw.
6.6 Checking the brake fluid level
F
Brake fluid is poisonous and must there-
fore be stored in the closed original con-
tainers.
Z
Lack of brake fluid is indicated by a red
LED on the information and service dis-
play.
– Park and secure the truck (refer to
chapter E).
– Visually check the brake fluid level on
the brake fluid reservoir (10); if neces-
sary, add brake fluid (refer section
5.1).
Z
The brake fluid level must be visible bet-
ween the “Min.” and “Max.” marks.
M
Replaced oils and lubricants must be disposed of as specified by the applicable en-
vironment protection laws.
6.7 Check fixing of the wheels
– Park the truck and render it safe (see chapter E).
– Tighten wheel bolts cross-wise with a torque wrench.
Torque
Driven wheels M
A
= 195-10 Nm
Rear wheels M
A
= 195-10 Nm
8
9
10