Jungheinrich ETVC 16, Operating Instructions Manual

Page: 40 / 89

E 7
1005
.G
B
Adjusting the steering column
– Loosen the steering column locking
(10) and adjust steering wheel (20) to
desired position.
– Tighten steering column locking me-
chanism.
Switching on the truck
– Pull up the master switch (15).
– Insert the key in the key switch (13)
and turn clockwise against the stop to
position "I".
– Check the horn for proper function.
– Check the brake pedal and the par-
king brake for correct functioning
(refer to section 4.2).
The truck is now ready for operation.
The battery discharge monitor shows the current battery capacity.
3.1 How to use the safety belt
o
– Read this section completely before
starting up the floor conveyor.
– Fasten the belt before performing any
movement of the floor conveyor.
– Adjust the belt height setting (49)
according to your size.
F
The belt protects you against severe
injuries.
– If the belt buckle (47) or the belt reel-
up device is frozen in, let it thaw and
dry.
M
The temperature of the warm air-stream
must not 60°C.
F
Do not modify the safety belt.
– After an accident has occurred, check
the safety belt and the seating cover
for damages. Exchange them, if requi-
red.
– Damaged or not fully functioning safe-
ty belts may only be exchanged by
contract dealers or branches.
– Only original spare parts may be used
for upgrading or repairs.
15
20
13
10
49
47 48
E 7
1005
.G
B
Adjusting the steering column
– Loosen the steering column locking
(10) and adjust steering wheel (20) to
desired position.
– Tighten steering column locking me-
chanism.
Switching on the truck
– Pull up the master switch (15).
– Insert the key in the key switch (13)
and turn clockwise against the stop to
position "I".
– Check the horn for proper function.
– Check the brake pedal and the par-
king brake for correct functioning
(refer to section 4.2).
The truck is now ready for operation.
The battery discharge monitor shows the current battery capacity.
3.1 How to use the safety belt
o
– Read this section completely before
starting up the floor conveyor.
– Fasten the belt before performing any
movement of the floor conveyor.
– Adjust the belt height setting (49)
according to your size.
F
The belt protects you against severe
injuries.
– If the belt buckle (47) or the belt reel-
up device is frozen in, let it thaw and
dry.
M
The temperature of the warm air-stream
must not 60°C.
F
Do not modify the safety belt.
– After an accident has occurred, check
the safety belt and the seating cover
for damages. Exchange them, if requi-
red.
– Damaged or not fully functioning safe-
ty belts may only be exchanged by
contract dealers or branches.
– Only original spare parts may be used
for upgrading or repairs.
15
20
13
10
49
47 48