Jungheinrich ETVC 16, Operating Instructions Manual

Page: 43 / 89

1005
.G
B
E 10
4.2 Driving, steering, braking
Emergency cut-out
– Depress the master switch (15).
This will switch off all electric functions.
Functioning of the switch must not be af-
fected by object placed on it.
Driving
F
Do not drive the truck unless the hoods
are closed and locked in the stipulated
manner.
The main direction of travel is in the di-
rection of the drive (V). Be especially ca-
reful when driving in the direction of the
load (R).
Z
The truck should only be driven in the direction of the load (R) for positioning purpo-
ses and for picking up or depositing loads.
– Render truck ready for operation (refer to section 3).
– Release the parking brake (11).
– Set the travel direction switch (21) to the desired travelling direction (V) or (R).
– Press the accelerator pedal (4) and the foot key (6).
The truck will now move in the selected direction.
F
The foot key (6) prevents the operator's foot from protuding beyond the truck's con-
tour while driving. If it is not pressed, all electrical functions except for the steering,
the information and service display (LISA), the horn and the battery discharge indica-
tor are deactivated. The truck coasts to a stop in accordance with the parameter set
for the “coasting brake”. The lowering function remains functional.
Z
The travelling speed is controlled by means of the accelerator (4).
o
Douple-pedal version
Driving
Floor conveyors from the double-pedal
series are provided with two pedals
which can be used for selecting the dri-
ving direction. They can also be used for
regulating the driving speed.
Driving pedal 47: Driving in fork direc-
tion.
Driving pedal 48: Driving in actuation di-
rection.
When driving, both feet are to kept on
the pedals.
R
V
15
21
11
4
5
6
R
V
47
5
48
1005
.G
B
E 10
4.2 Driving, steering, braking
Emergency cut-out
– Depress the master switch (15).
This will switch off all electric functions.
Functioning of the switch must not be af-
fected by object placed on it.
Driving
F
Do not drive the truck unless the hoods
are closed and locked in the stipulated
manner.
The main direction of travel is in the di-
rection of the drive (V). Be especially ca-
reful when driving in the direction of the
load (R).
Z
The truck should only be driven in the direction of the load (R) for positioning purpo-
ses and for picking up or depositing loads.
– Render truck ready for operation (refer to section 3).
– Release the parking brake (11).
– Set the travel direction switch (21) to the desired travelling direction (V) or (R).
– Press the accelerator pedal (4) and the foot key (6).
The truck will now move in the selected direction.
F
The foot key (6) prevents the operator's foot from protuding beyond the truck's con-
tour while driving. If it is not pressed, all electrical functions except for the steering,
the information and service display (LISA), the horn and the battery discharge indica-
tor are deactivated. The truck coasts to a stop in accordance with the parameter set
for the “coasting brake”. The lowering function remains functional.
Z
The travelling speed is controlled by means of the accelerator (4).
o
Douple-pedal version
Driving
Floor conveyors from the double-pedal
series are provided with two pedals
which can be used for selecting the dri-
ving direction. They can also be used for
regulating the driving speed.
Driving pedal 47: Driving in fork direc-
tion.
Driving pedal 48: Driving in actuation di-
rection.
When driving, both feet are to kept on
the pedals.
R
V
15
21
11
4
5
6
R
V
47
5
48