Jungheinrich ESE 220, Operating Instructions Manual

Page: 8 / 170

3.1 Checks and Operations to Be Performed Before Starting Daily Work 54
3.2 Entry and exit 55
3.3 Adjusting the driver’s seat 56
3.4 Adjusting the Floor-Plate Height 56
3.5 Preparing the truck for operation 58
3.6 Checks and operations to be carried out when the truck is operational 59
3.7 Parking the truck securely 60
4 Industrial Truck Operation 61
4.1 Safety regulations for truck operation 61
4.2 Emergency Disconnect 64
4.3 Deadman button 66
4.4 Travel 66
4.5 Steering 68
4.6 Brakes 69
4.7 Load handler raise/lower 71
4.8 Lifting, transporting and depositing loads 73
5 Troubleshooting 76
5.1 Truck does not start 77
5.2 Load cannot be lifted 77
6 Operating the truck without its own drive system 78
7 Optional equipment 81
7.1 Brake Pedal in Footwell with ESE 220 81
7.2 Display and control unit 82
7.3 Setting the time 83
7.4
Keypad (CanCode) (
o
) 84
7.5
ISM access module (
o
) 102
7.6 Floor-Spot 103
.
F Industrial Truck Maintenance 105
.
1 Operational Safety and Environmental Protection 105
2 Maintenance Safety Regulations 106
2.1 Working on the electrical system 107
2.2 Consumables and used parts 107
2.3 Wheels 107
2.4 Hydraulic system 108
3 Lubricants and Lubrication Schedule 109
3.1 Handling consumables safely 109
3.2 Lubrication Schedule 111
3.3 Consumables 112
4 Maintenance and repairs 113
4.1 Preparing the truck for maintenance and repairs 113
4.2 Lifting and jacking up the truck safely 113
4.3 Cleaning 114
4.4 Checking the hydraulic oil level 118
4.5 Tightening the wheel nuts 119
4.6 Checking electrical fuses 120
4.7 Restoring the truck to service after maintenance and repairs 121
5 Decommissioning the Industrial Truck 122
5.1 Prior to decommissioning 122
5.2 During decommissioning 122
5.3 Restoring the truck to service after decommissioning 123
6 Safety tests to be performed at intervals and after unusual incidents 124
8
04.19 en-GB