Jungheinrich ESE 220, Operating Instructions Manual

Page: 74 / 170

4.8.1 Raising a load
Requirements
– Load correctly palletised.
– Load weight matches the
truck's capacity.
– Load handler evenly loaded
for heavy loads.
Procedure
• Drive the truck carefully up to
the pallet.
• Drive the load handler slowly
into the pallet until the pallet
is against the back of the load
handler (see graphic to the
right).
Z
The load must not extend by
more than 50 mm beyond the
load handler tips.
• Raise the load handler until
the desired height is reached,
(see page 72).
The load is being raised.
NOTICE
Risk of material damage to the hydraulic unit
When the mechanical stops of the load handler have been reached, release the
"raise load handler" button. Otherwise the hydraulic unit may suffer material damage.
74
04.19 en-GB