Jungheinrich ESE 220, Operating Instructions Manual

Page: 66 / 170

4.3 Deadman button
The deadman button must be pressed to lift, lower or travel.
If the deadman button is released during travel, the truck decelerates at the
maximum rate until it stops.
If the deadman button is released during lifting or lowering, the respective function
cuts out immediately.
4.4 Travel
WARNING!
Collision hazard when operating the truck
Collisions with personnel and equipment can result if the truck is operated with open
panels.
u Do not operate the truck unless the panels and covers are closed and properly
locked.
Requirements
– Start up the truck, see page 58.
Procedure
• Press the deadman switch (17).
• Set the Multi-Pilot (10) to the required travel direction.
• Move the Multi-Pilot (10) in the load direction (3):
Travel in the load direction.
• Move the Multi-Pilot (10) in the drive direction (2):
Travel in the drive direction.
• Control the travel speed by moving the Multi-Pilot (10):
• The further the Multi-Pilot (10) is moved, the greater the travel speed.
Z
When the Multi-Pilot (10) is released, it automatically returns to the neutral
position and the truck brakes.
The brakes are released and the truck moves in the selected direction.
Z
The travel direction is indicated on the display (7) (
o
).
66
04.19 en-GB