Jungheinrich ESE 220, Operating Instructions Manual

Page: 143 / 170

2.2.2 Inspection contents
The following points must be checked:
2.2.2.1 Standard equipment
Electrical system
Cables and engine are secure and for damage
Warning and safety devices are in accordance with the operating instructions
Function of display and controls
The function of the emergency disconnect and for damage
Contactors and/or relays for wear and damage
The electric wiring for damage (insulation damage, connections) and the fuse ratings
Carbon brushes for wear
Power supply
The function of the battery latch and battery attachment and for damage
The function and secure seating of the battery connector and for damage
Travel
The function of the deadman switch and for damage
Drivetrain bearings for wear and damage
Transmission for noise and leaks
Wheel bearings and attachment for wear and damage
Wheels for wear, damage and secure mounting
Chassis/structure
Industrial truck for damage and leaks
The secure seating of the chassis and screw connections and for damage
Labels are legible, complete and plausible
The function and secure seating of the adjustable floor plate and make sure it is secure
Driver's seat for damage
The secure seating of the driver's seat and the function of the adjustment mechanism
Operator mat and steps are non-slip and free of damage
Protective mechanism against trapping and shearing is present, secure, functions
correctly and is free of dirt and damage
Hydraulic operations
The function of the "hydraulic system" controls and for legibility, completeness and
plausibility
The secure seating of the lift-limit cut-off/lift cut-off and for damage
The function of the lift mechanism and for wear and damage
The secure seating of the cylinders and piston rods and for leaks and damage
Slides and stops for wear and damage
143
04.19 en-GB